Movie black technology

After carefully studying the A1 projector sent as a sample, Chen Shencai turned off the machine.

This holographic projector is undoubtedly a great technological breakthrough compared to the one he installed in the mech before.

In addition to being too large, its imaging quality is not inferior to the pockmarked holographic portrait that appeared in "Pacific Rim 2".

Moreover, compared with the effects shown in movies, the A1 projector also has the function of displaying large-scale holographic images outdoors, and has a certain resistance to strong wind and strong light. In addition, with the improvement of special materials such as holographic dust, the future There is still room for improvement in holographic imaging quality.

If this kind of machine is put into the advertising industry now, many people should be interested.

As for the application in other industries, it depends on the development of technology and creativity.

At this point, it's not something he should worry about.

Chen Shen shook his head and sealed the machine again.

Back at the prosthetic center, just in time to see a smiling He Anshou walking out of the test site and trying to grasp objects with the robotic hand on the prosthetic bone in the office.

Compared with the self who could only walk normally, the current him has obviously stepped up the control of the prosthetic bone, and he can control the arm.

Ma Zhen thought Chen Shen just went to the toilet, and said excitedly: "The brain control module given by the brain computer center is really good, and Uncle He's adaptation speed to this pair of bones is so fast that even I was surprised!"

Chen Shen reminded him: "Uncle He has experience in manipulating brain-controlled prosthetics before, and he also used this pair of bones for experiments before?"

If there wasn't so much foreshadowing before, no matter how powerful He Anshou is, it would be impossible for the operation to be as smooth as it is now within an hour.

Before Ma Zhen could speak, He Anshou over there had noticed his return, beckoned to him, and ran over.

Chen Shen even had time to appreciate his posture and consider his running speed.

Uncle He's running posture using this pair of exoskeletons is not very good-looking. It is a bit like a big man running with his legs between his legs. It is a bit awkward, but it should look much more normal after he is proficient.

As for the speed, it is far inferior to the speed of the prosthetic skeleton in the empty state just now. It is only about two meters per second, which is also the speed of normal people walking faster. Maybe after getting more used to it, the running speed can reach what Ma Zhen said. Four meters per second.

"Eldest nephew and Director Ma, thank you so much!" He Anshou, with tears in his eyes, stretched out his hand and wanted to shake hands with God Chen again...

Chen Shen took the first step, took the initiative to hold the wrist of the prosthetic skeleton, and started talking to Uncle He.

Ma Zhen behind Chen Shen, watching this scene, couldn't help shaking his red hands...

It took a full day for the prosthetic skeleton to run through all the tests, which turned out to be very successful.

He Anshou is very satisfied with his new "hands and feet", and is also very happy with the promise made by Prism to let him experience the new style preferentially.

The next improvement direction of the prosthetic skeleton is the same as the two systems of Nezha Kuafu, which is to strengthen the neural interaction between humans and machines.

In human terms, it is not only necessary for people to control prosthetics through nerve signals, but also to install sensors on the prosthetics, which can send signals back to the installer's nerves in real time, so that the installer can regain the sense of touch.

And it would be best to do it non-invasively.

In fact, this path is the one taken by the generation of angels who competed with Nezha's generation before, but although they took the right path, they took it too early and too hastily. and other reasons, unable to install their prosthetics.

A week after the trial, Prosthetics released the news of the prosthetic skeleton to the public.

In addition, the naming of the prosthetic bones has not been determined before, so before the publicity, it is necessary to give this pair of prosthetic bones an official name.

Chen Shen did not participate in the naming this time, but instead handed over full power to Ma Zhen.

He originally thought that this guy would take a name like "Xinsheng" or "Hope", but he didn't expect that the last name he saw on the promotional video was Xing Tian!

To be precise, it is the Xingtian series of exoskeletons, and the model of the prosthetic exoskeleton is Xingtian-1, and the one that He Anshou is using now is Xingtian-1.

Later, Ma Zhen called him to announce the good news, and explained why he chose this name by the way:

"Originally, I wanted to name it 'Xinsheng'. After all, our product can be regarded as giving patients like Uncle He a new life, but someone told me that our previous products were all named after Chinese characters. , I dare not make an exception, and finally the name was voted out by everyone.”

"I also think it's quite appropriate. After all, the Xingtian-1 aircraft looks like it has only limbs and a body, but no head. In the Shenzhou story, Xingtian's head fell off, and he survived strongly in the end. This is angry. It also fits very well with the purpose of our exoskeleton.”

That's right, a character who has to live without a head, the name of the prosthetic skeleton is perfect.

Where did this name come from...

Chen Shen didn't say that the company's products must be related to the characters of Shenzhou. This is completely guesswork by others.

No matter what the name is, it will not hinder the explosion of Xingtian No. 1.

Angle released only two short videos, which add up to only one and a half minutes. The pictures shown were the screen of the tester operating in the air when the machine was empty, and the scene of He Anshou's real-life test on the machine.

The smooth operation of Xingtian No. 1 in the screen shocked everyone's attention, and even Ma Zhen, the person in charge of the Xingtian No. 1 project, appeared in front of the public again.

Anyone who knows a little about robots knows how much effort it takes to make a humanoid skeleton reach this level of freedom of movement.

Although it is not controlled by AI, it is not technically a robot.

But behind this is the absolute advancement in neural control and the leadership in the field of brain science.

When this video was spread abroad, Newsom, who had once sought cooperation with Chen Shen, even directly expressed his hope in public that he could cooperate with Angular.

This kind of technology is really scary. In Newsom's view, Xingtian-1 is simply a miracle!

With the analysis method of neural signals, even Ma Zhen, an undergraduate student, can create such a miracle. If he can get the mystery of it, what achievements can he make?

No matter how curious the outside world is, the reality is that Xingtian-1 has no plans for mass production, and it will only exist as a customized product in the future, after all, the users are special.

As for Ma Zhen's next project, he has already thought about it.

"In the past few days, many people have been suggesting ideas to me." When talking about this matter, Ma Zhen smiled a little embarrassedly.

In the past few days, he has been resting, interacting with netizens under his meager account, and drawing inspiration from the public by the way.

"I saw that many people told me to develop an exoskeleton for people with gradual freezing to help them in their daily life. I also think this direction is very good. Maybe you can try it?" Ma Zhen asked Chen Shen for his opinion. .

ALS refers to people suffering from amyotrophic lateral sclerosis. After suffering from this disease, the muscles of the limbs, trunk, chest and abdomen will gradually become weak and atrophy. The famous physicist Hawking is a patient of this disease.

At present, the best expectation for the second half of life of ALS patients is to sit on a smart wheelchair.

At present, ALS is still one of the five terminal diseases in the world alongside cancer, leukemia, rheumatoid, and AIDS. The cause of the disease is unknown. It is estimated that the deployment of photoacoustic scanners for scientific research and the development of corresponding algorithms will be possible. Some clues were found in the data information.

Regarding Ma Zhen's decision, Chen Shen thinks it is very good.

"The previous Xingtian No. 1 can't be regarded as a real exoskeleton. If this exoskeleton is successful, then your transformation from prosthesis to exoskeleton will be basically complete."

"You can delve into the specific ideas, or you can just ask me."

"I understand." Ma Zhen agreed with high morale on the other side.

Since the turmoil of Xingtian-1, the technology circle has been much calmer than it was in June.

Every day, it is either a new technology adopted by a certain mobile phone, or a new color matching for which mobile phone.

In the midst of this calm, an official report about vigorously developing new domestic civil transport helicopters, promoting the new development of the special transport industry, and helping industrial construction to a higher level quietly appeared and then quietly fell silent.

The news was hardly noticed by anyone other than aviation enthusiasts.

Even if he noticed it, he never thought that it would be closely connected with Chen Shen.

Apart from prescribing a new medicine for Hangba, the news hardly left a trace on the Internet.

And under this calm, there are hidden waves.

The recent period is extremely important for Chen Shen and Yanjiao.

Because most of the projects that are going on now have entered a critical period at this time.

Jingwei helicopter needless to say.

As a new project, Chen Shen put the most energy into it, and all the materials unlocked during this period were thrown out by him.

All kinds of new materials that need to be used are now in trial production. As long as they pass the test, they will be sent to the production line to be turned into various parts as soon as possible.

The aerodynamic shape of the helicopter was also quickly redesigned, and a model was manufactured and put into a wind tunnel for blowing tests. The official airframe is also being produced simultaneously at Chen Shen's request.

An important reason why it was so fast was that Hang Yucheng didn't make major changes to the appearance at all.

He just modified many irrelevant places on the basis of the system design. In addition, the original shape was slightly different from the Chinook. Chinooks are exactly the same, and there are still many differences between the two shapes when you look closely.

Regarding these changes, Hang Yucheng said that he is not sure that this will make the aircraft better, but at least it will not be bad.

That is to say, the Jingwei helicopter has a huge design redundancy to play like this. If it is replaced by a general helicopter, it is eager to find an optimal solution, and no capacity is wasted.

In addition to the redesign of the aerodynamic shape, the fastest progress is the rotor of the helicopter.

As early as late July, Xie Yiyi and the two film crews completed the shooting task, and the propellers made of carbon fiber composite materials were delivered the next day after leaving the base.

It is precisely because of the production foundation laid by Dabai before that the production of blades can be so fast.

It's just that now that the paddles are delivered, they can only be stored in the warehouse, and they have no other use except to look long.

Chen Shen's main focus is on the helicopter, but he also pays attention to the progress of other projects from time to time.

The most important first-generation carbon-based chip production line has now determined the specific production process and plan, and can officially start construction, and other links in the industrial line are also advancing steadily.

Comrade Lao Chen's cooperation with other domestic companies to raise funds has also been temporarily settled. In addition to Huawei, there are other private capitals involved, and many seemingly related and unrelated state-owned companies have come in to get involved.

This fundraising was strictly kept secret by all parties. Even if the outside world found out, it was impossible to fully determine the whereabouts of the funds because of the complexity of the contributors.

The originally estimated 200 billion funds have now raised 100 billion. Among them, there are 20 billion invested by Angkor, 5 billion invested by Warwick, and the rest are invested by other partners and loans approved by the bank.

In addition to the subsidies given by the state, the angular 20 billion includes some loans, and most of it is the income from the transfer of photoacoustic scanner agency rights.

Even though the prospect of photoacoustic detection is not completely clear yet, the wealthy medical groups are very willing to spend a sum of money to gamble. Anyway, there are insurance clauses, and the possibility of their money being wasted is very small.

The progress of cloud engine technology is also quite gratifying, reaching 30%.

Also, there are some fairly fragmented pieces of technology.

For example, the new technology used in VR glasses, tactile gloves, universal treadmill, etc., he has already handed over the technology, and found a suitable manufacturer for Angle, completed the pre-production preparations, and can be put into production at any time.

From time to time, Chen Shen also sent some new ideas summarized in the Oasis project to the smart center, such as one hundred new methods to prevent the model from wearing the mold, thirty methods to prevent illegal plug-ins...

These are the technologies he summed up based on the code of the Oasis project in his spare time, which can greatly optimize the world of Shenzhou.

Time slowly arrived in September.

The first important project has completed the research and development journey.

That is the Shenzhou system.

As one of the cornerstones of the Shenzhou world, the research and development of the Shenzhou system has been advancing all the way under the arrangement of Chen Shen.

Even though some targeted localization of the system was required to increase the neural control part, the programmers completed the first version of the Shenzhou system at an astonishing speed.

Although this is basically the same as the previously estimated date, Chen Shen was still pleasantly surprised when he heard the good news from Li Jun!