Rebirth 2008: I Can Make Money Reading

Chapter 181 Unexpected Mistake (seeking monthly ticket)

On January 12th, the company's new dormitory was opened, and Mu Yang went for a stroll, feeling pretty good.

On January 13, the land acquisition of 2,000 mu was completed.

When Mu Yang received the notice from the Z Mansion in H City, he felt that the land acquisition was progressing a bit fast, which was a bit unexpected.

It is estimated that the Chinese New Year is coming soon, and the local residents want to spend money to enjoy the New Year.

The sooner they sign up, the more perks they get.

If you wait until the New Year, the subsidy will be gone, and the land may be forcibly expropriated, so the money you get will be much less.

On January 15th, on behalf of the company, Mu Yang actually signed the handover of 2,000 mu of industrial land with Z government. The actual land area is 2,003.5 mu. After paying taxes, the transfer fee is 778.5 million yuan.

District Z government will assist Xinghai Group to handle the remaining procedures and give the green light all the way.

Now, the land can be leveled. When the land is almost leveled, the foundation laying ceremony will start, and the foundation laying ceremony is planned to be held in the next year.

Xinghai Group found a construction engineering company to level the land.

Office buildings, laboratory buildings, dormitories, canteens, factory buildings, etc. involve a relatively large amount of investment. After the land acquisition is completed, Xinghai Group invites bids from outsiders.

Xinghai's bidding this time is an invitational bidding, that is, it invites more powerful and experienced architectural design companies and construction engineering companies to bid. After the year, Xinghai Group will invite relevant experts to assist in the evaluation of the bidding documents. The bid evaluation cannot be the bidding company. In the end, Xinghai Group felt that it could open the bid and notify the winning bidder.

After the bid opening is started, the real construction will start.

The 2,000-acre industrial land factory and headquarters, Xinghai Group requires all to be put into use within one and a half years. Some factories have low requirements and are built faster, and may be used in July of 2010.

After the construction is completed, the Xinghai Group will have a decent headquarters, and the territory will be truly complete.

January 17, 2010.

This day is the day of the national selection for the WorldSkills Competition.

The national selection of the World Skills Competition is not limited to one location. For example, the CAD mechanical design project has 5 selection locations across the country, namely Sucheng Technician College, Longyan Technician College, Dongshan Provincial Labor Technician College, Guangdong City Industry and Trade Technician College and Jin City Technician College.

For the welding project, there are also 5 selection venues, two of which are enterprises, and the other three are technician colleges. Fortunately, one is in H City Technician College.

Mu Yang had three projects that entered the national selection competition, but due to the location and time conflicts of the selection competition, it was difficult to coordinate. He gave up the mechatronics project and chose to participate in the CAD mechanical design project and the welding project.

If both projects enter the national training camp, but the training venue is not in the same city, maybe one will be given up.

At the beginning, Mu Yang didn't know which ones he could enter the national training camp, so he signed up more, and got more achievement points by the way.

The company is only 164 kilometers away from Sioux City Technician College, and it only takes two hours by highway.

He arrived in Sioux City on the night of the 16th and slept in a hotel in Sioux City for one night. On January 17th the next day, he participated in the CAD mechanical design selection competition at the Sioux City Technician College. After this competition, he returned to H City to participate in the welding selection competition. .

For this year's WorldSkills Competition CAD mechanical design project, the software happens to be Soliworks2008. Of course, this software is selected for the selection competition. Muyang's software skills have reached the intermediate level of level 5.

The competition includes four modules, including assembly design and engineering drawing, mechanical manufacturing, mechanical design challenge, and reverse design. The competition time for each module is 2.5 hours for the trials and main competition, and the cumulative time for the competition is quite long.

The CAD mechanical design competition items are all computer operations, depending on the individual's proficiency in the Soliworks 2008 software and understanding of mechanical design.

No matter how good a contestant is under the age of 22, his proficiency in using Soliworks software is not as good as that of a mechanical design engineer who has used this software for more than ten years, let alone Mu Yang.

Mu Yang showed off on the spot. It took less than half an hour for each competition module, and he finished four modules within two hours.

Anyone who has studied CAD software knows that if you are proficient in the application of various functions of the software and the shortcut keys, you can quickly finish drawing a gear box. If you are not proficient, you may not be able to finish it in a few hours.

It takes about 25 minutes for Mu Yang to complete a module, but he deliberately controls the speed and draws slowly. If he rushes a bit, it may take more than ten minutes, or even less, which is a bit scary.

Other contestants may not complete a module in 2.5 hours, and excellent contestants need an hour. Mu Yang directly crushed it, and the judges on the spot called the drawing master.

Of course, drawing fast does not mean that the score is high, and it is also required to complete various topics. For example, in 3D modeling, there are scoring items such as surface modeling, changing part shape, creating part family, and determining part characteristics.

For designers who often do design, it is not difficult.

Generally speaking, in the Soliworks competition, domestic participants are really inferior to foreign references.

Muyang's competitors are overseas, not domestic.

After the game, Mu Yang returned to City H that day, a little faster than expected.

It will take a few days for the results of the competition to be released.

The next day, Mu Yang went to H City Technician College to participate in the welding project.

It is impossible for the welding project to imagine CAD mechanical design so quickly. Even if Mu Yang is proficient in welding operations, he is not much faster than other contestants.

Everyone welds the same structural modules, and the welding process is roughly the same, that is, the welding speed is not much different.

Mu Yang's welding is very stable, he basically can't make mistakes, his thinking is clear and he starts quickly, and he doesn't have so many worries, so his welding efficiency is faster than other players, and overall, it is twice as fast as most players.

But it took Mu Yang more than three hours to complete the welding of the four modules.

Welding is tiring work. When welding, it is in a high temperature environment, which is hot. When welding for secondary protection, welding spatter splashes on the clothes, and it is normal to wear a few holes.

In addition, there will be smoke and dust from welding, and it will be uncomfortable to inhale the smoke and dust. If you wear a mask, the mist from your mouth will spray on the protective lens.

Welding also has a lot of radiation, and young people don't want to do it if they are all sweaty in summer.

Those who choose the welder job are all fancy welders whose salary is higher than other jobs, so they have no choice but to choose.

Now Mu Yang has a choice, but it is worthwhile to work hard for a few hours for achievement points.

It takes only a few hours of hard work to get achievement points, and it is so easy to do other things.

The scoring standards for the welding project of the WorldSkills Competition are very strict.

For welding carbon steel, the weld width error of manual arc welding and gas shielded welding cannot exceed 2 mm, and the height difference cannot exceed 1.5 mm.

For welding stainless steel, the weld width error and reinforcement of argon arc welding should not exceed 1 mm.

The distance between the centimeters depends entirely on the feel, and can only be mastered by repeated practice every day.

If it is an actual welded product, it can be repaired if there are welding defects, but in the competition, it is a big mistake, and the surface of the weld is not allowed to be polished, and it will be as it is after welding.

Mu Yang's competition work was perfect, and received unanimous praise from the on-site judges, and many videos about his operation were shot.

Mu Yang left the Technician Academy after participating in the welding competition. He could also guess the result, and there would be no problem entering the national training camp.

three days later.

The results of the WorldSkills National Selection Competition came out.

Undoubtedly, Mu Yang's two competitions were all included in the national training list, and he won the first place in the selection competition, and his results were much higher than other competitors.

But he received the national training notice, and when he saw the document, he sighed and felt a little regretful.

Both Mu Yang and Feng Younan made a mistake. After being selected into the national training team, they will have to undergo three months of hard training.

The welding project is in Suzhou Zhongye Group. The training time is from January 25 to April 25. Except for the week when you can go home during the Spring Festival, the rest of the time is training.

For example, the welding project requires more than 8 hours of welding practice every day. It is boring and hard work to repeatedly weld and fix several modules.

In fact, just like the welders in the factory, they work 8 hours during the day and another 4-5 hours at night.

If you enter the training camp, it is estimated that you will practice twelve hours a day, which is still normal.

In the end, five out of ten will be promoted from the national training team, and finally two out of five will be selected, and two welding players will represent the national competition.

When participating in the provincial selection competition, Mu Yang was only focused on participating in the competition, and did not ask clearly about the national training camp. He came and went in a hurry, busy gaining experience.

It's true that he didn't investigate clearly himself. He only knew that the finals would be held at the end of April, and he didn't know the specifics of the national training camp.

I thought that like the national football team, the training camp would be over in a few days.

It's not that Mu Yang is afraid of hardship, the main reason is that he doesn't have the time to train.

In fact, even if he is asked to practice for a long time now, he is not willing to suffer.

Mu Yang became interested, and played it occasionally, but now he is unwilling to let him practice this for a long time.

The training location of the CAD mechanical design project is also in Sioux City, and the coaching staff requires a long time for the training. They have to attend classes every day, and then practice. It is divided into several training stages, which is very time-consuming, and Mu Yang is unwilling to participate.

If you want to represent the national team to participate in the competition without passing the training camp, the coaching staff will not agree, which is very unfair to other training players.

However, Mu Yang was also very satisfied and gained several achievement points.

I just received a prompt from the reading system.

[System prompt 1: The welding project won the first place in the national selection competition of the 40th World Skills Competition, achievement point +2]

[System prompt 2: The CAD mechanical design project won the first place in the national selection competition of the 40th World Skills Competition, achievement point +2]

Total Achievement Points: 70

If you can represent your country in the competition and win a gold medal, you may have 5 achievement points for a project, maybe more than that.

It takes too much time, and it will take three months, which is of course not worth it. With this time, it is better to gain experience and patent inventions.

But if I give up like this, I feel a little pity, and finally went to the national training camp.

Mu Yang touched the stubble that had not been shaved for two days, and thought to himself: How about giving it a try, maybe he can participate without participating in the national training camp.

If it's the Universiade or the Olympics, no matter how strong his strength is, Mu Yang doesn't think that method will work.

However, this WorldSkills Competition may be able to do so.