In the previous process, Xu Yang only wore ears and not a mouth. No comments were made. He has been observing silently from the sidelines.

He has completely digested the design of this machine tool, and the entire inside of the machine tool has been imprinted in Xu Yang’s mind. It is indeed more precise to say that it is precise, and it is even more precise than the latest machine tool he designed. The upper limit of accuracy of machine tools is also much higher.

However, precision instruments and equipment also have their shortcomings. Maintenance costs are high and maintenance is difficult. Once a problem occurs, maintenance time will be relatively long. It is also very difficult to repair. Unlike the machine tools designed by Xu Yang himself, the maintenance is simple and the operation is stable, but the accuracy is a bit lacking.

If you were asked to design a similar machine tool, how would you combine the advantages of the two machine tools?

This is a question Xu Yang has been thinking about these days.

When the expert group encountered difficulties, Xu Yang finally spoke.

“Teacher, is it possible that the fixture is unstable? I took a look at the fixtures for this kind of machine tool before, and it seems that they are specially designed for general-purpose parts.

When clamping special-shaped workpieces, they may not fit properly.

During the operation, affected by the vibration of the machine tool, the workpiece will deviate slightly, eventually leading to processing failure.

On our assembly line, the fixtures of each machine tool are different.

They are specially designed based on your workpieces to solve the problem of processing stability.

“Xu Yang said

“Hey, this is really possible.”Professor Wei said.

Director Ma immediately laughed and scolded:”You kid, have you discovered this problem a long time ago? Did you just bring it up now? Xu Yang chuckled:”

I didn’t dare to confirm whether this was the problem before.””

“I think you want to see the real internal structure of this imported machine tool. But that’s fine, this trip was not in vain.”Director Ma smiled.

Xu Yang took advantage of the absence of Beigang people to express his opinion.

The expert team returned to Beigang’s introduction machine tool workshop and began to carefully inspect the fixtures on the machine tools. Sure enough, it was just as Xu Yang said.There has been a certain degree of wear on the fixture. This indicates that the workpiece did indeed slide during the processing.

“Director Ding, the problem may have been found.

During the break just now, Xiao Xu suggested that the processing failure might be caused by the instability of the fixture.

We just checked and found that the fixture is indeed somewhat worn, indicating that the workpiece may have deviated during the processing.

The machine is fine.

But the clamp is only suitable for universal parts.

If you want to process this batch of our workpieces, you need to specially design corresponding fixtures.

This is not difficult for Mr.

Li.

“Director Ma said.

Li Zhiliang nodded:”The clamp is easy. I immediately designed a set of jigs. Then try the machine again.”

At the request of factory director Ding Kecheng, the experts from the mechanical department still stayed at Beigang. Xu Yang wrote and drew in his notebook every day. There was no delay when the time came.

“Xiao Xu, luckily I brought you here this time. Who would have thought that the problem would appear on the fixture? Therefore, you technicians on the front line of production are the easiest to find problems. It is right for you to stay in the rolling mill to complete your research project.”Director Ma said.

It would be a bit embarrassing if so many experts from the mechanical department came here and couldn’t even find out the problem.

“Beigang’s engineers were too rough and failed to discover such an obvious problem. We were also misled by them. We always guessed the problem inside the machine tool, but ignored this simplest possibility.”Professor Wei said

“In fact, if I hadn’t designed specifically for your batch of workpieces, I wouldn’t have thought it was a problem with the fixture. Because when these machine tools were designed, the accuracy was not improved much. My purpose is to improve the stability of the machine tool so that our machine tool can reach the upper limit of accuracy. So, I made articles on the jig.”Xu Yang said

“This is the benefit of your background as a fitter. If you have been a fitter yourself, you will naturally know where the most likely problems are during the machining process. That’s why you have your special design of the fixture. Otherwise, it would be really hard to find this problem today.”Director Ma said.

Li Zhiliang, the chief engineer of Beigang, still had two brushes. He quickly designed the fixture and replaced the original fixture introduced into the machine tool. Then he processed the batch of high-precision workpieces again. This time There are no more problems with the processed products. However, the quality is still not as good as that of the rolling mill. It is just qualified.

But there is no problem with the machine tools, but the operators need to improve their operating proficiency.

Beihang has specially prepared a farewell banquet for the mechanical department team.

“Xiao Xu, what do you think of our Beigang?”Ding Kecheng asked

“Very good, the scale is much larger than our steel rolling mill. The factory building is also spacious and bright, and there are so many imported equipment.”Xu Yang said

“After you graduate from graduate school, are you interested in joining us?”Ding Kecheng asked

“Can’t come. My staff has always been in the steel rolling mill, and I am still receiving wages from the steel rolling mill. If I want to run away, Secretary Yang can chase me with a wrench and hammer me!”Xu Yang shook his head.

Everyone laughed.

Director Ma laughed and said:”Not to mention, Lao Yang can really do such a thing.”

Secretary Yang is a person who came from the combat army. He has experienced hundreds of battles and is straightforward. Now that he is in the company, his temper has changed a lot, but when he is angry, his temper is still very bad.

“Don’t be afraid, don’t be afraid. As long as you are willing to come, I can definitely get you here.”Ding Kecheng said.

Xu Yang shook his head:”Everywhere you go, you contribute to the country. I’m used to the steel rolling mill, but I’m really not used to it in a different place.

On the way back, Professor Wei said to Xu Yang:”Your choice is right.” Although Beigang is stronger than the steel rolling mill, it is not suitable for you. They already have a total. If you go there, I will be the deputy chief engineer at most and that will be the end of it. Li Zhiliang is only in his forties, and it will take more than ten years for him to retire. If you go to a steel rolling mill, with your ability, you will be the chief engineer in a few years. Director

Ma also agreed:”Besides, you have a relatively high degree of freedom in the steel rolling mill. Secretary Yang will probably support whatever you want to do.” If you go to Beigang, what do you want to do? First you have to pass the Li Zhiliang test.”

“The most important thing is that you are in a steel rolling mill and close to our school. You can come over and help us solve problems in the future. Professor Wei said with a smile

“That’s what Professor Wei said. Director Ma laughed loudly

“When I go back this time, I will definitely be scolded by Secretary Yang. If we solve the problem for them, our factory’s orders will be reduced by half.”Xu Yang said

“You don’t have to worry about this. If the workpieces processed by Beigang are not of high quality, we will not want them. If there are good parts, let me use the bad parts, unless there is something wrong with my brain. Director Ma said

“If Beigang wants to produce high-quality products, it is estimated that the furniture will have to be redesigned.”Xu Yang said

“Why didn’t you tell me about Beigang?”Professor Wei said.

Director Ma smiled and said,”If Xiao Xu had told her, Li Zhiliang might not only not be grateful, but would actually hold a grudge. Professor Wei immediately understood what was going on:”Li Zhiliang is indeed not very broad-minded.””

It’s not that Xu Yang is worried about offending Li Zhiliang, but there is no need to say it. If Beigang cannot even solve this small problem, it is not worthy of competing with the steel rolling mill for orders. At this time, Xu Yang has no need to be selfless.

Back to the steel rolling mill , and as expected, Secretary Yang called him over.

“You kid, do you want to help our competitors?”Secretary Yang smiled and”criticized” Xu Yang.

“At that time, Director Ma and the others did not notice this small problem. If I didn’t mention it, our Mechanical Department would lose face. Moreover, the imported equipment that the country has spent so much money on cannot be wasted.”Xu Yang said

“You did a great job. Beigang is really useless, and the imported equipment they spent huge sums of money on is a waste in their hands. Might as well give it to our factory.”Secretary Yang is not without a sense of gloating.

Colleagues are enemies. The steel rolling mill and Beigang compete in business. Beigang has always had an absolute advantage before. Every time the ministry competes for interests, the steel rolling mill is the loser.

This time , it fell to Beigang to introduce equipment, and Secretary Yang was very unconvinced. After all, the performance of the steel rolling mill during this year was much more impressive than that of Beigang.

However, Beigang is much larger in scale, and many times the department’s resources are exhausted. It was tilted towards Beigang. The superior leaders thought it was normal, but Secretary Yang felt very angry.

Beigang finally stabilized the quality by redesigning the fixture.

But it is not 100% quality control. Among them There are still about 30% qualified products, and even about half of the unqualified products have appeared.

Compared with the 100% excellent products in the improvement workshop of the steel rolling mill, the gap is huge.

Therefore, the steel rolling mill has hardly been affected much.

Xu Yang is at the steel rolling mill The influence is naturally increasing day by day. (To read Baoshuan novels, go to Feilu Novel Network!)

What surprised Xu Yang was that he had not seen Yu Haitang for so long after returning to the steel rolling mill.

I heard that Yu Haitang was studying hard. , preparing to take the college entrance examination. It seems that she still listened to Xu Yang’s words.

The reason why Yu Haitang did not go to Xu Yang is because she has low self-esteem now and feels that she is not worthy of Xu Yang at all. Therefore, she wants to take the college entrance examination , became a college student, so that she would be a good match for Xu Yang.

But what she didn’t expect at all was that Xu Yang meant that she would have a chance to be admitted to college when the college entrance examination resumed after the strong wind blew.

Instead of taking the college entrance examination now.

The college entrance examination is still very difficult at this time.

The number of college enrollments is relatively small and it is very difficult.

Moreover, with strong winds, the college entrance examination will be cancelled.

Even if Yu Haitang wants to take the exam, there is no chance.

After the college entrance examination is cancelled, the worker, peasant and soldier college student system will come out. When the time comes, college students will not rely on exams, but on recommendations.

However, in the original play, Yu Haitang was also an activist during the great turmoil. Maybe there will be a chance to become a worker, peasant, and soldier college student.

Xu Yang didn’t know that Yu Haitang was in this world Will there be any changes here, but for the time being, he doesn’t want to have anything to do with Yu Haitang. His main energy is still focused on the research project. He wants to complete the research project while the university is still open, and strive to get the Graduate diploma.

If the university is suspended, he, a graduate student, doesn’t know when he will be able to graduate.

Moreover, Professor Wei and others have never appeared in the original drama, and Xu Yang doesn’t know if they have been affected.[]

Professor Wei has already sent Xu Yang information on microelectronics and semiconductors. All materials are in foreign languages.

After Xu Yang got it, he felt like he had found a treasure. I spent a few days forgetting food and sleep to digest all this information.

Acquired several skills.

Microelectronics Engineering Skills: Beginner (0/200)

Semiconductor Engineering Skills: Beginner (0/200)

Integrated Circuit Skills: Beginner (0/200)

Because they are self-taught skills, all these skills can be entered directly.

On the same day, Xu Yang simplified semiconductor technology

“.Semiconductor Engineering Skills are being simplified… Simplified successfully… Semiconductor Engineering Skills Use a multimeter to measure the diode resistance.”

This is quite simple. Diodes are in the radio. Xu Yang directly used a multimeter to measure the resistance on them. His skill proficiency continued to rise.

Xu Yang’s understanding of semiconductor technology became more and more profound, and a large number of semiconductor Technical knowledge poured into Xu Yang’s mind. This is the magic of the system. A lot of knowledge is not in the materials Xu Yang has read, but can also be created out of nothing.

And as the level increases, many technologies that transcend the times also enter. In Xu Yang’s mind, before going to bed that night (good), Xu Yang had already mastered this skill.

The next day, Xu Yang used the energy points refreshed that day to simplify the inheritance circuit skill.

“Integrated circuit skills are being simplified…Simplified successfully…Integrated circuit skills make a simple integrated circuit.”

Simple integrated circuits are actually very easy, not to mention the system gave Xu Yang a suggested integrated circuit. Xu Yang only needed to find a few very simple diodes to make the integrated circuit.

These parts, Xu Yang Yang can be obtained directly from used radios. You can also buy it from regular stores. But the price will definitely be more expensive.

Originally, Xu Yang could buy these things through the asset department, but Xu Yang still did not do so. Anyway, these accessories are being practiced After completing the skill, you can still use it. After another day of practicing the skill, the skill level was upgraded to Xiao Cheng.

On the third day, the microelectronics engineering skill was also upgraded to Xiao Cheng.

By this time, Xu Yang’s knowledge reserve, It was enough for him to design a more advanced machine tool.

But Xu Yang felt that it was not enough. He planned to improve all related skills to Dacheng or above.

After being bored in the office for a month, he still had the same skills when he returned home.

Many people thought that Xu Yang’s design is in trouble. But no one can help, so they can only worry on the sidelines

“Little master, the meal is brought to you. You can’t stay in the office all the time. Proper relaxation may bring you new ideas.”Guo Dabozi put the lunch box on Xu Yang’s table

“Lao Guo, thank you. Don’t worry, I’m fine. I’ve been looking for inspiration lately, and I feel like I’m getting better!”Xu Yang said with a smile. He knows what these people think. After all, his liver skills are indeed a bit weird.

But that’s what it means to simplify the system to practice skills.


Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like