The Rise of Heavy Industry 1980

was troubled by the spindle, Wang Song almost forgot that the 12 mm driven shaft still had processing problems, so he couldn't take a break and ran directly to the workshop.

When I came to the door of the workshop, I found that the five brothers of the lathe class were squatting by the wall and smoking, and Liu Degui, who was wrapped in bandages on his hands, was talking about something in a gesture, and the crowd laughed from time to time.

Wang Song was angry when he saw this scene, a group of heartless old things, the processing of curvature and fillet has not been solved, they are here giggling, it seems that it is not good to scold them.

The old factory director had a gloomy face, and walked up to speak, Liu Degui took the initiative to say: "The factory director is back! I heard that Changhai Agricultural Machinery is going to place an order for us again, it's really fake, tell us about it!"

Wang Song scolded: "Tell me a fart! Tell me

what you're doing first?" Liu Degui gritted his teeth and smiled: "The five little cubs are all in hand, and they're doing a good job, so don't allow our five brothers to rest for a while?" When did you become Zhou Peel, factory director?"

Wang Song glared and said: "I'm talking about the processing of fillet corners! If this matter can't be solved, none of you should eat in the bowl and look at the pot, and in the end you will all go home and drink the northwest wind!"

After listening to the words of the old factory director, Liu Degui slapped his head and said: "Oh damn it, damn it, you don't know about this yet...... The processing of the variable curvature fillet has been solved, and the method is very ingenious, and we don't need to get started, the five little cubs are all playing

with thieves!"

I saw that five lathes were in operation, and five young men in their twenties were each operating one. The five of them are naturally the "little cubs" in Liu Degui's mouth.

According to the technological process, the processing content of each station is very simple, just a simple workpiece transfer, so the five young people have already become hands.

These Wang Song have long known that what the old factory director does not understand is that a strange tooling has been added to the last lathe, the tooling is fixed on the bench by bolts, and the tool holder is connected by a connecting rod, and the young lathe worker presses on the tool holder with one hand, and only needs to push lightly, the tool will walk according to the trajectory of the approximate arc, and then a gooseneck fillet appears at the shoulder position.

After the processing is completed, the young lathe worker releases the vise, removes the workpiece and puts it into the bamboo basket, which already has more than 20 finished shafts.

Wang Song suspected that his eyes were spent, rubbed his eyes vigorously, picked up a shaft and looked at it carefully, and was sure that it was indeed a very perfect curvature

fillet! Wang Song's eyes finally fell on the tooling on the bench, which was the key to processing the gooseneck fillet!

......

Nanyang City is not big, the circle of machining is smaller, from raw material supply to parts processing, to system assembly, a total of more than a dozen.

The recent strong performance of the Red Star Factory has attracted strong attention in the circle, and the most obvious change is that Wang Song rarely has time to drink with other factory directors.

In the past, due to the recession of the industry, there was no work in each factory, and the factory directors often got together to drink and chat. Recently, the orders of the Red Star Factory have increased sharply, and Wang Song is busy and can't spare time to talk nonsense with others.

Wang Song did not participate in the wine party, but the Red Star Factory became the focus of discussion in the wine party.

Some people say that Hongxing Factory invited a master in the province a while ago, and he is very clever from product design to processing methods, so he can win so many orders.

Some people also say that Wang Song and the chief engineer of Changhai Agricultural Machinery climbed into their own house, the reason is that someone once saw Ma Sanyuan send Wang Song back in a Hongqi car. What is the concept of Hongqi cars, if it is not really relatives can use Hongqi?

Putting aside these rumors, all factories have felt the crisis, and if the development of Red Star continues, other factories will be squeezed out

of the yellow line! So something that no one mentions in the open, but in fact very blatant, began to appear: Other factories began to dig into the corners of Red Star in an attempt to find the real secret of the Red Star Factory.

There is no impermeable wall, especially in this era of lack of management concepts, the new axis drawings of the Red Star Factory were quickly circulated, and even the process flow diagram was not spared.

Everyone wants to eat the meat of Changhai Agricultural Machinery, so many processing factories have begun to imitate samples, and they have set up a line with Changhai Agricultural Machinery to strive for a piece of the pie.

As a buyer, Changhai Agricultural Machinery certainly does not mind the increase in supply, which is conducive to reducing prices, so it is publicly stated that any factory can send samples and quotations, and organize evaluations in a centralized manner.

This incident fell into the ears of the Red Star people, and they collectively scolded other factories for not being kind, and Wang Song was even more angry that he couldn't eat for several days! Wang

Chaoyang persuaded him: "This thing can't be avoided, but don't worry, our shaft is not so easy to imitate, and it's not too late for you to get angry when the

evaluation results come out!" Wang Song nodded, knowing that it was too early to say anything before the evaluation results came out.

On the second day, four factories gathered in Changhai Agricultural Machinery to participate in the sample evaluation, namely Dayou Machinery, Sanhe Machinery Processing Factory, Black Mountain Metal and Nanyang Machinery No. 2 Factory.

Among them, Dayou Machinery is the strongest of the four, and the factory director is Pan Daqing's brother-in-law. Last time, Pan Daqing suffered a dumb loss in the Red Star Factory, and he has been holding back his revenge, and he has long begun to instigate his brother-in-law to compete with Wang Song.

In order to defeat the Red Star Factory, Pan Daqing supplied bar material to Dayou Machinery at cost price, which led to the quotation of Dayou Machinery was only 2.2 yuan, which was 4 cents lower than the quotation of Red Star Factory, which was an advantage that no other factory had.

It is almost certain that as long as the samples of Dayou Machinery can pass the evaluation, Changhai Agricultural Machinery will definitely allocate most of the orders to Dayou Machinery

!"After the evaluation, no one should leave, I have booked a private room in Sanfu Restaurant, let's have a good drink! If you don't go, you won't give me Pan Daqing's face!" Although Pan Daqing did not directly participate in the sample delivery, he was also among his peers. In his opinion, it is a sure thing for Dayou Machinery to win the order.

"There is Boss Pan for a treat, of course we have to go, and I want you to take care of it in the future!"

For them, it is impossible to compete for orders from Changhai Agricultural Machinery, because the cost advantage of Dayou Machinery is too obvious. Instead of competing, it is better to get closer to each other and take care of each other's business.

Machining factories are like this, and it is difficult to survive in isolation.

The sample test begins, and it needs to go through 6 evaluations, just like the last sample test sent by Wang Song. Samples from Dayou Machinery, Mikawa Machinery, Montenegro Metal and Nanyang Machinery Plant No. 2 were numbered separately and sent to the test equipment in turn.

The first few tests went well, and the last one was the stiffness testing equipment, where the 15-ton hydraulic supercharger opened its huge upper and lower jaws and waited for the test samples to be fed.

The first to participate in the test was Nanyang Machinery No. 2 Factory, and the needle of the pressure dial just jumped, and the prototype shaft was bent.