The technological empire begins with polymer materials

In the evening, Wu Dongming led the bosses to leave Kunlun Group.

Gao Yuan tried his best to invite everyone to have another dinner, but everyone refused and left in a hurry.

"Sorry, I made you laugh." Mr. Wu Dongming said with a wry smile: "Zhang Jiangliang used to be very calm, but he didn't expect to become like this now. The fault lies with the layman and the expert. We must try our best to avoid similar situations in the future. In this situation, for more than ten years, the national team has spent hundreds of billions, and finally it ended up like this, ugh."

Wu Dongming was heartbroken. Look at Kunlun Group, and then look at SMIC, which is known as the domestic semiconductor leader. How can they compare? The gap is really too big.

Gao Yuan smiled, said nothing, and did not give Zhang Jiangliang any more blows.

It's not that the plateau is kind, but it's not necessary.

During this period, too many things have happened. Western sanctions and the rebellion of key talents have completely exposed the problem of SMIC, the biggest flag of the national team, and the higher-ups are very angry about this.

As long as Gao Yuan waits patiently, the question of whether to sell SMIC to Kunlun Group and let a private company take up the banner of semiconductors will soon be settled.

Watching the two buses go away, Cao Feiyu said to Gao Yuan: "All the semiconductor power controlled by the national team is here. If these dozens of companies are sold to us, we can save ten years of hard work and get investment in the semiconductor industry in advance. After all, this is the most complex and technologically advanced industry on earth."

Just a ticket?

Gao Yuan was noncommittal about this. He was actually very confident because he was the only man on earth who cheated, and the system information was already stored in Gao Yuan's head.

It's just that it's not easy to put knowledge into practice. The three gangs of heroes are far behind with just manpower. Even if the plateau is covered with iron, it can only drive a few nails.

"I don't dare to think about taking over the entire national semiconductor team. I just hope that I can get the Changchun Optical Machine first. Our optical lens has been completed. We can't do it without a matching machine."

Gao Yuan muttered in a low voice, very cautiously. He was very confident about what role he, a small businessman, should play in front of the national team.

…

Imperial capital.

Gao Yuan's guess was correct. He went to Kunlun Company to inspect this group of people. The composition was very complicated. In addition to Wu Dongming who led the team, there were also some close associates of the big boss.

It only took one night, and early the next morning, several reports appeared in the big bosses' offices. After reading the reports, the big bosses were quickly shocked by three important terms in them.

Ternary, advanced artificial intelligence, extreme ultraviolet laser combined lens system.

It turns out that ternary calculation is a necessary prerequisite technology for advanced artificial intelligence!

Gao Yuan has obviously mastered Zero, the most powerful artificial intelligence in the world, but he is not satisfied yet and is still working towards something higher and stronger!

"Hey! It would be great if the plateau was ours."

"Comparing Gao Yuan and Zhang Jiangliang together, I suddenly want to strangle Zhang to death!"

The big bosses all lamented that, as the saying goes, comparing people to others will lead to death, and goods need to be thrown away. Gao Yuan is far-sighted and has long been preparing for the next generation of computer projects, but Zhang Jiangliang is still engaged in internal cleaning, cultivating crooks and cronies, and suppressing Disobedient prickly head.

How to compare?

There's no comparison at all!

As for the extreme ultraviolet laser combined lens system, it is another technology that shocks the big guys.

As we all know, laser light is generated from the emitter, processed by the objective lens, and finally hit on the exposure table to etch crystal lines on the silicon-based wafer. The machine that completes this entire set of procedures is called a photolithography machine.

Kunlun Technology does not have the foundation to build photolithography machines, but they have an optical research institute and the best lens grinding and calibration system in the world.

Therefore, Gaoyuan built an important objective lens system inside the lithography machine. This set of objective lenses can be installed on the domestic lithography machine. As for whether it can have the effect of turning things around and approaching or even surpassing the Dutch ASML, it will have to go through a series of complex processes. Experimentation and running-in.

In a conference room, everyone listened to the briefing from Wu Dongming. Wu Dongming reported the process and results of the visit to Kunlun Group to the bosses, and then returned to his seat. As a powerful figure in the Ministry of Industry and Information Technology, Wu Dongming's seat Being arranged in the last row is enough to show the high level of this meeting.

"What do you think of Gao Yuan?" a voice asked.

"He didn't have any objections. He just said that if SMIC was sold to him, he would be able to save ten years of hard work. Otherwise, he would have to start from scratch. Although Kunlun Group is huge, it did not have a semiconductor department before." Wu Dongming said.

The big guys nodded one after another. It was obvious that Gao Yuan was determined, but lacked experience and manpower. Currently, within China, only the national team could provide him with enough ammunition.

"Sell it to him? Can't we cooperate?" Another big boss said: "Let SMIC and Kunlun set up a joint venture, just like they did with the Aerospace Group, study together and share the results."

Wu Dongming shook his head and said: "It's impossible. SMIC has not only state-owned assets, but also some foreign capital. Gao Yuan said that he has no problem cooperating with the Aerospace Group because the identity of the Aerospace Group is clear, and SMIC is obvious. Plateau will not cooperate with companies that have foreign capital in them.”

Hey~

The big bosses raised their eyebrows one after another, and a certain big boss said with emotion: "I didn't expect that a private company in Plateau would be more radical than us."

Everyone lamented that Gao Yuan was really a stubborn guy and could not tolerate the slightest bit of sand in his eyes. In fact, the proportion of foreign capital in SMIC was not high to begin with. Forming a joint venture and diluting it should not cause much trouble.

But Gao Yuan still did not agree with such a plan. Even if foreign investment accounted for only 1%, he was stubborn and refused to agree.

"What else?" the boss asked again.

"Gao Yuan said that if SMIC's matter cannot be settled in a while, it would be okay to first approve him to cooperate with Changchun Optical Machinery. After all, their lens system is only one of the components of the lithography machine, and they also need to cooperate with related companies. Only then can a complete photolithography machine be integrated." Wu Dongming said.

This request is very reasonable.

The big guys nodded one after another. People often think that Shanghai Microelectronics is the national team responsible for the lithography machine project. This is not true. The Changchun Institute of Optics and Mechanics has been responsible for the 13.5nm extreme ultraviolet lithography machine, code-named Project 02.

The so-called lithography machine 02 special project, the overall structure is like this.

Tsinghua University and Imperial Huazhuo Precision Technology are responsible for the dual workpiece stage system. The current project progress is relatively fast and all problems have been basically solved. Therefore, Huaxia has become the second entity in the world to master this technology.

The first company to win the dual workpiece stage was ASML of the Netherlands. Their Twinscan technology has been in production for several years and has proven to be reliable.

The Fluid Power and Electromechanical Systems Laboratory of Zhejiang University and Zhejiang Qier Electromechanical are responsible for the immersion system of the immersion lithography machine. It has been basically completed. They are the third company in the world to master this system after ASML of the Netherlands and Nikon of Japan. the existence of a technology.

The excimer laser light source is the responsibility of the Institute of Optoelectronics of the Chinese Academy of Sciences. It is rumored that it can only achieve a power of 40w. However, the power of the light source used by ASML in the Netherlands reached 250w in 2019. The gap is still relatively large in this regard.

As for the Dutch ASML light source suppliers, they are North American Cymer and Japanese Gigaphoton.

The last and most important optical system, Changchun Institute of Optics and Mechanics is responsible for the objective lens, and Shanghai Institute of Optics and Mechanics is responsible for the lighting. The progress of the project is unknown.

As for the objective lenses and lighting of Dutch ASML, they come from the famous German Zeiss.

Anyone who knows photography should know how high-quality Zeiss lenses are. Of course, most ordinary consumers don't know that the Carl Zeiss Group actually has a semiconductor department.

It can be seen that the so-called world's most powerful Dutch ASML lithography machine is actually made by standard IWC. All the world's top technologies are piled together to form an ASML extreme ultraviolet lithography machine.

Therefore, what China Lithography Technology wants to challenge is not ASML, but the whole world.

Asking for a monthly ticket! Please recommend!