Movie black technology

After the day's test ended, Li Yan did not leave the base, but called the engineers in charge of cockpit assembly, and they continued to discuss a highly feasible assembly plan.

Although in the drawings, Chen Shen has already marked out the various positions of the cockpit and what equipment to be placed, but with so many equipment, instruments and circuits, they still have to consider how to lay them out, what to install first, and what to install later to achieve the best results. Good results.

In addition, there are some parts that are difficult to install, such as the zoom telescope of the observation window on the head of the crimson storm!

The front is a glass lens. In the deep sea, glass is very fragile. Once there is a small scratch on the surface of the glass, it may become a breakthrough of huge water pressure, which will cause the glass lens to be damaged from production to installation. Do not touch any hard objects during the whole process, even nails.

Moreover, the bonding between the observation window and the glass needs to be very tight, and the gap between the two should not exceed 0.2 wires, which is 0.002 mm.

These basic experiences are all information obtained from the previous Qianlong project. Li Yan also found the Qianlong project and got more details about it.

Although in Chen Shen's drawings, due to the special reason of the glass material, the installation requirements do not need to be so high, but Li Yan still used to do it with the highest standard.

Li Yan and his engineers looked at the first-hand engineering information given by Qianlong, discussed the installation plan, and a feasible plan gradually took shape.

There are other parts that are difficult to install, and he has found similar reference cases in China, which provides a feasible support for the assembly plan.

Li Yan has expressed emotion more than once, if there were no such cases, it would definitely take a lot of time for them to solve these problems.

After Chen Shen heard the news, he couldn't help expressing the same emotion as Li Yan. Without the support of different projects in various fields in China, this project really couldn't go so fast.

The Crimson Storm's carrier platform comes from aerospace, part of the assembly process comes from deep submersibles, the vector engine relies on the aviation industry, and armor and mechanical parts processing...

This is a kid who grew up eating a lot of food!

Of course, with such great efforts in these fields, the technology of Crimson Storm will also be fed back to these fields in the future.

With the foundation of the current ultra-large carrier platform, a lot of effort can be saved in the design of the carrier platform in the aerospace field in the future.

In the future, deep submersibles or submarines can use the sealing technology on Crimson Storm, as well as the processing technology of deep-sea pressure-resistant titanium alloy.

Storm series vector engines, if the magic modification is successful, a vector engine with terrifying thrust may be added in the country...

Not to mention the technology in the field of damping and shock absorption that can be used in many fields.

As for the field of civilian use, the technology on Crimson Storm will not be released in a short time. One is the need for confidentiality, and the other is that the scientific researchers themselves have not fully understood the technology. What are they talking about transforming the technology into the civilian field?

Chen Shen didn't want to do such tiring work.

But the benefits of these scientific research or national defense fields alone are considerable enough.

The crimson storm arm did not delay too much time. The right arm has already been assembled. Now it only needs to be disassembled, divided into two parts, the upper arm and the lower arm, and then assembled.

After the other right arm has previous assembly experience, the assembly speed is also very fast.

As for the remaining left arm, it was even easier.

Originally, the left arm was a plasma cannon, but the plasma cannon had already been built and sent to the mountains. Naturally, it was impossible to build another one and install it on the left arm.

So Chen Shen had already modified his left arm on the drawings.

Although the exterior shape and other sealing designs remain unchanged, the inside of the forearm has become a fuel tank.

The left arm will serve as the auxiliary fuel tank of the mecha in the future, increasing the battery life of the mecha.

It is estimated that after adding this auxiliary fuel tank, the full-power operation time of the Crimson Storm can reach about eight hours.

This kind of modification reduces the difficulty of assembly. If it is still a plasma cannon, the various high-precision instruments inside are not so easy to assemble.

After installing the left and right arms, all that needs to be installed is the cockpit and the two large oil tanks behind it.

The first thing to install were two large oil tanks. Before installing these two devices, the back armor of the mecha could not be installed, and the three vector engines underneath could only be exposed naked.

Two large oil tanks, like the inner liner of a kettle, were hoisted high, and all the movable aerial platforms were in use. The technicians stood on them and reported the status of the hoisting through the walkie-talkie.

They waited until the location was correct, and then they manipulated the aerial platform to approach, and tied the safety ropes to start fixing the oil tank storage tank.

Seen from below, the construction workers look like ants climbing a giant.

However, the power of these "ants" is shocking. I don't know how many times they have created miracles one after another.

After the storage tank is installed, other small parts need to be installed, and the last thing to install is the red titanium alloy armor on the exterior of the oil tank.

After installing the armor of the oil tank, things are not over yet.

It also needs to install a huge back armor under it, and at the same time, two rounded triangular scapular fins are installed on the left and right sides to keep the mech balanced.

However, it only took three days to install these devices. During the period, Chen Shen was watching from the side, and the speed was astonishingly fast.

When these two devices are installed, the Crimson Storm is more than 90% complete, and only one cockpit is missing.

"The cockpit is almost ready, let's go and have a look together." Li Yan waited until the warehouse was assembled, and said to Chen Shen.

Of course we have to take a look.

Chen Shen and Li Yan went to the assembly area together, and now the assembly of the cockpit has started.

The plan that Li Yan and the others discussed before was decentralized assembly in the air.

Install the bottom of the cockpit first to get a foothold, then attach the four-sided frame and other cabin equipment to the bottom, and finally the most delicate part of the zoom telescope.

The advantage of this is that it can be assembled and constructed at the same time.

The bottom of the cockpit is a special interlocking piston device, which can greatly increase the flexibility of the neck connection, so that the speed of the mech turning its head is almost the same as that of a human being.

After the huge piston device and the four-sided frame are installed, many internal devices are transferred to it by aerial platforms or cranes, and technicians install them.

And in the assembly area on the ground, there are still a large number of technicians who are assembling the remaining equipment in the cabin according to the assembly plan. Every time a piece is assembled, it will be sent to the mecha for installation.

The most complicated cockpit was moved up to a height of 72 meters little by little using this clumsy method of ants moving house.

Final assembly took place late at night, with the base still brightly lit.

Even though Chen Shen and Li Yan were sleepy, they still stood on the overpass at the edge of the wall, staring at the construction situation on the opposite side.

There was hardly a sound heard at the scene, and everyone held their breath and stared ahead.

The robotic arm carefully docked with the cockpit with the observation window. Under the precise positioning of the instrument, there was no mistake in the docking on both sides, and they were perfectly docked together.

Crash!

At the moment when the docking was completed, bursts of enthusiastic applause erupted on the flyover, on the aerial platform, and the people who were still struggling suppressed their inner joy and continued to applaud.

Even Li Yan, who has always been prudent, couldn't help but put his arms around Chen Shen's shoulders and shook Chen Shen: "It's done!"

Chen Shen smiled happily and felt emotional.

This project was completed so quickly, even he himself was very unexpected.

After the successful docking, many technicians suppressed their excitement and hurriedly brought machinery and equipment into the cabin to fix the newly installed observation window.

It wasn't until they fixed the observation window that the crimson storm was truly completed.

Chen Shen stepped onto the air platform and controlled the movement to the front of Crimson Storm. Looking at the world's first large-scale mecha, and possibly the last large-scale mecha, he couldn't help feeling deeply moved.

Although it has a huge body, its burly and majestic torso and legs, as well as its slender and powerful three arms, can make people feel deadly. It must be an agile killer!

"The whole machine will be inspected tomorrow, and the first test will be carried out a week later."