Rebirth 2008: I Can Make Money Reading

Chapter 131: The Exhibition Begins

Mu Yang and the others set off at 8:30 in the morning, stopped at the service area for a while, and arrived at the hotel near the exhibition center at 11:00 noon.

After Mu Yang asked people to put away their luggage, they found a place to eat, took a lunch break after eating, and went after waking up.

At ten o'clock, Mu Yang received a call from Yang Hai, saying that the robot had broken down, and the technician said that he probably knew the reason, but after he talked for a long time, the technician still didn't understand the reason.

Forget it, the one with the problem is KUKA, the interface is all in English, and the technician has only learned fur for a few days, so it's no wonder that he can understand it.

When he arrived in Shencheng, he was not in a hurry, no matter how urgent he was, he would not be in a hurry for an hour or two.

The expo covers automobiles, moulds, industrial parts, robots, automation, electronics/information and communication, metal products, rail transit, aerospace, shipbuilding, medical equipment, packaging machinery, elevators, home appliances, pipelines, power facilities, national defense Military industry and other industries.

So far, ten sessions have been successfully held.

The booth of Xinghai Machinery Co., Ltd. is in the laser processing \u0026 sheet metal stamping technology exhibition area.

Not only Mu Yang, but other employees are also curious about what the company's booth looks like.

After one o'clock in the afternoon, everyone left the hotel, got in the car, and walked towards the CIIF.

The hotel is a few kilometers away from the exhibition center. After about ten minutes, the driver parked the car on the roadside of the exhibition center. Everyone got off and drove away.

I saw an opening ceremony stand in front of the convention and exhibition center, and there were several large characters on the background wall, "2009 Huaguo International Industrial Exhibition, Opening!"

After Mu Yang and others registered at the gate of the exhibition, they could enter after receiving the audience badge.

The exhibition area is relatively large, and there are huge crowds of people at this time. Everyone looked at the division map of the exhibition area on the wall, and quickly found the laser processing \u0026 sheet metal stamping technology exhibition area, which also had the booth location of Xinghai Machinery Company.

Block C No. 16.

A few minutes later, everyone found the company's exhibition area.

"Ah, this is our booth. It's very impressive." Fatty, Li Ming, and Song Xuelu and the others couldn't help admiring when they saw the logo of Xinghai Company and recognized it as the booth of Xinghai Company.

"I spent a lot of money, can you not be arrogant?"

Mu Yang smiled faintly.

In the 36-square-meter booth, half is the laser welding exhibition area, and the other half houses 4 small industrial robots, which are blocked by guardrails and set up a safe area.

These 4 robots are ABB, KUKA, FANUC, and Yaskawa. They are part of the robots that Mu Yang donated to the school. The robot laboratory of the school is still under renovation and has not been donated yet. Use it for a few days first.

But, unexpectedly, something went wrong right after the exhibition started.

Mu Yang came to the booth, called a technician, turned on the power of the robot, checked the workstation, and found out the reason after looking at it, which was the same as he guessed.

The correct program is not selected, so the correct program is not executed.

After the robot is started, if it does not execute the posture of the first line of program, it will immediately jump from the current posture to the posture of the first line of program, and there will be a burst, which is very dangerous.

"Do you understand?"

"Well, I understand this time, boss, I'm really sorry for delaying things." The workers admired the boss very much, from the bottom of their hearts, the handheld laser welding equipment was invented by the boss, and these robots are also sneaky , still so young.

It would be great if my own children had one-third of the skills of the boss.

"It's okay, there's nothing to delay."

Mu Yang explained clearly to the workers again, but he didn’t expect the workers to fully understand. He learned ABB back then, and it took him two or three days to adjust the six-axis posture, but he was not proficient. Basic programming.

After learning about robotics and then OTC, you will figure it out in a few days.

This thing has to be taught by someone. If no one is taught, it is too difficult to learn, and it is difficult to understand when reading books.

Mu Yang called Yang Hai and several salesmen, and solemnly explained: "When the robot is running, don't let anyone in!

Although there are two layers of safety fences, some people are curious to go in and have a look. The empty speed I set is very low, but it is still dangerous, and the robot will not recognize it.

If there is an accident, press the red emergency stop button immediately. I have set up three external main switches, and you can press any of them. Press it once, and the four robots will stop running immediately. "

Muyang didn't install a safety grating (triggered when it crosses the line), it was a bit troublesome to set up, and in such a large area, how many safety gratings should be installed.

"Ok, I see!"

Everyone nodded, they don't know how to operate the robot, they still understand by pressing the red emergency stop button.

Mu Yang waved everyone to go and start the robot.

Among the four robots, two robots form a confrontation posture, one holds a samurai sword, and the other also holds a samurai sword, like two swordsmen fighting. After the automatic operation mode is turned on, there will be an infinite loop of various swordsmanship moves .

The other two robots, one with a gun and the other with a stick.

These four robots are all taught by Mu Yang. Even if he is familiar with operating these four brands of robots, there are too many movement paths, and they have to be adjusted to the appropriate speed and posture. It took him an hour or two to press the buttons so hard.

It took him three days to fine-tune the trajectory and synchronous cooperation of several robots.

In fact, it is also possible to program offline on the software and then transfer it to the robot, but the offline programming software for each brand of robot is different, and it must match the model of the robot, so it is very troublesome to install the software on the computer.

ABB uses Robotstudio, which is easy to match, but the software of Yaskawa and FANUC is too manipulative for DAN. Mu Yang simply taught on the spot, but the efficiency is faster, but the buttons are hard to press.

Hard work paid off, and this thing is particularly eye-catching.

After just 20 minutes, many viewers were attracted by the movements of these robots, and they had never seen such novel movements.

Can robots still play martial arts moves?

Experts know that they can do it, but it is too troublesome to adjust the posture slowly for the video, and most people don't have the patience to operate it.

However, judging from the running posture of the robot, it is difficult for ordinary operators to teach poorly. Besides, there are still four major brands, and the operation methods of different teaching pendants are very likely to be taught by four people.

It is nothing new for a person to know how to operate two types of robots, but it is relatively rare to know how to operate more than three types. They must have resources for them to operate.

For laymen, it is fresh, and they feel that the technology of this company is very powerful.

The exhibition is so big, and it is an industrial fair, so there must be robots on display, but such cumbersome movements are still fighting movements, which are smooth and accompanied by background music, very much like four martial arts masters fighting.

In the whole exhibition, it is really not as fun as here.

This is Mu Yang's secret weapon. It didn't take long for the company to be watched by thirty or forty spectators, and it was a success.

A few days ago, Yang Hai was also shocked when he saw the workers install the robot and put it into trial operation.

"My boss is so awesome, he knows everything, and he can't do anything!"

I heard from the workers that this was taught by the boss, and they don’t know how to adjust it, but they still know how to install the robot and simply start the robot to run, and the boss taught them.

Fatty and Li Ming squeezed into the crowd and watched for a long time in front of the robot. After watching for more than ten minutes, the fatty squeezed out of the crowd to find Mu Yang: "This robot is really fun."

"If you play too much, you will find it boring. After my factory is built, I will buy a batch of OTC welding robots. You are interested in learning how to operate it." Mu Yang replied, if it is only simple operation, if there is a master to teach it In a few days, I can roughly understand the interface kinetic energy of a brand of teach pendant. It is easier to learn the robot of the island country, but it is much more difficult for KUKA.

But if you want to program, especially KUKA, the difficulty is greatly increased. It is impossible to program independently after a month. If you don’t know English, it will be even more difficult to learn, but there is no Chinese interface.

If the welding robot uses OTC (the robot body is Nachi, the welding machine is OTC, and the two parties cooperate), the programming will be much simpler. If the brain is flexible, it will take a week or two to learn to use common commands and welding settings such as FN80 call program and FN41 pause. .

But if you want to operate proficiently, you can't do it without more than one year.

"Okay, I can brag about it after I learn it." The fat man laughed.

"Go for a stroll if you have nothing to do, take a look at other people's equipment, and remember to come back when it's almost five o'clock in the afternoon. I may have more things to do, so I don't have time to play with you." Mu Yang replied.

Song Xuelu knew that Mu Yang was busy, so she went to shop for equipment by herself, and stayed at the Xinghai exhibition, so she couldn't help much.

Mu Yang saw Yang Hai and three salesmen answering questions from customers, and a technician was demonstrating welding to the audience.

Fresh things can easily attract the attention of people in the industry, which is much better than Mu Yang's expectation.

At the beginning, Mu Yang was worried that there would be no customers to consult.

For some booths, there are really few people to consult, and most of them will lose money.

——

Li Hui and the sales staff of Fangqi Laser Company are really envious of seeing Xinghai Machinery becoming more and more popular.

At this time, there were dozens of people watching over there, but there were less than three spectators on their side, and there were more staff members than spectators.

Awkward.

"Fuck, is this a robot? Can a robot play like this?"

"Damn, it sucked away the popularity from our side. There wasn't much in the first place, but now it's all gone!"

This morning, the two salesmen of Fang Qilaser laughed at the paralysis of Xinghai Machinery's robots. When Mu Yang touched them lightly, they all came back to life, and they lived in tricks. They had never seen it before, so they couldn't help but take a closer look.

Li Hui saw all his salesmen running to other people's premises to join in the fun, what kind of talk is that!

"What are you two doing, come back!"

After scolding, the two subordinates smiled embarrassedly and had no choice but to come back.

Li Hui walked over to have a look by himself, and after looking at it, he was also attracted, and came back after looking at it for more than ten minutes.

When he left, he found that sixty or seventy people had gathered around to watch.

Mu Yang also noticed that people from Fang Qilaser had come to watch, and he was quite familiar with domestic laser manufacturers.

It can be considered a success if it can attract competitors to come and appreciate it.

There were more people in the audience, which also attracted real buyers. Yang Hai was busy and explained to the guests.

Mu Yang didn't want to worry about sales, so he went around to see the exhibition areas of various laser manufacturers.

Half an hour later, Mu Yang came back and sat in the rest area, saw Yang Hai coming to drink mineral water, and asked him: "How is the sales situation?"